Whenever outside servicing personnel are to be engaged in activities covered by the lockout/tagout regulation, the employer's on-site lockout or tagout procedures must be followed.Accident prevention signs and tags (or both) must be placed on the controls.Must be de-energized or disconnected from their power source (or other actions taken to effectively prevent inadvertent movement or release of stored energy) if they do not have lockable controls An important part of preparedness is being appropriately trained and aware of the hazardous energy sources involved and how to control them.Must be locked out or positively sealed in the "off" position if they have lockable controls (or are readily adaptable to lockable controls). LOCKOUT & TAG OUT (LOTO) PROCEDURE Contents OBJECTIVE: Objective of this procedure is to provide minimum requirements for lockout and tag out of energy- isolating devices to protect any Person from hazardous energy including electrical, mechanical, hydraulic, pneumatic, or any other energy.During Repair Work and Setting-Up Operations, Machines, Equipment /Prime Movers:.Workers must receive thorough training on the safe use and maintenance of these tools, methods or means. If machinery or equipment must move during these operations you must minimize the hazard by providing and requiring the worker to use extension tools (eg., extended swabs, brushes, scrapers) or other methods, or means to protect workers from injury.If necessary, the moveable parts must be mechanically blocked or locked out to prevent inadvertent movement, or release of stored energy.Ī mechanical block to prevent the machine part from falling on employees.This procedure shall be used while performing service and maintenance of. Accident prevention signs or tags or both must be placed on the controls of the power source of the machinery or equipment. To protect Town of Marana employees and contractors with an energy control procedure.Machinery or equipment capable of movement must be stopped and power source(s) de-energized or disengaged.During Cleaning, Servicing, Adjusting Operations: OSHAs Lockout/Tagout Fact Sheet describes the practices and procedures necessary to disable machinery or equipment to prevent the release of hazardous energy.
0 Comments
Leave a Reply. |